Skip to the content

Excellent adsorption of ultraviolet filters using silylated MCM-41mesoporous materials as adsorbent

Download a copy of the report

Silylated MCM-41 materials were examined to adsorb of ultraviolet (UV) filters from aqueous solution at303 K. Compared to UV filters adsorbed on un silylated MCM-41, a much higher adsorption capacity was achieved by silylated MCM-41 materials. Surface modification offers a greater opportunity to adjust both the pore size and surface properties of organic functionalized MCM-41 type materials. In the present study, MCM-41, methyl functionalized MCM-41 (M-MCM-41) and chlorotrimethylsilane end-capped(TMS-M-MCM-41) mesoporous materials were successfully synthesized using sol–gel technology. The structures and properties before and after surface modification were systematically investigated throughN2-adsorption desorption isotherms, scanning electron microscope (SEM) and transmission electron microscopy (TEM), small angle X-ray powder diffraction analysis (SXRD), and infrared spectroscopy (FT-IR). They together confirm that the methyl and trimethyl silyl (TMS) group is chemically bonded to the internal surface of the mesopores. The sorption of UV filters obeys Langmuir and Freundlich sorption isotherms, showing the suitability of silylated MCM-41 as adsorbent for enrichment of UV filters from water.


About the author

Dr. Howard Dryden

Dr. Howard Dryden

Dr. Dryden has unique knowledge combination of biology, chemistry and technology and is the inventor of the activated, bio-resistant filter media AFM®. Dr. Dryden is one of the world`s leading experts in sustainable water treatment.

comments powered by Disqus

Wherever you are and wherever you live, there is no safe haven from the toxic wave of chemical pollution

Dr. Howard Dryden, CSO

Goes Foundation

3/2 Boroughloch Square

Clean Water Wave

The Meadows